The pursuit of Excellence in Fine Woodworking
Loading Classes
Find Classes

Event Views Navigation

Past Classes › April

Classes List Navigation

April 2017
$860

Inlay Techniques In The Greene & Greene Style With William Ng

4/10/174/14/17

In this class we will be covering basic inlay techniques from design, materials, cutting, fitting, gluing up, to finishing. We'll proceed with more advanced techniques used in some of the Greene & Greene furniture. We will be dealing with materials such as shells, silver, brass, wood, plastic, and any material that we can cut, which is almost endless. The main tool for the class will be a four inch jeweler fret saw. Proper cutting technique will be emphasized. There will…

Find out more »
$1245

Greene & Greene Inspired Side Table With David O. Wade

4/17/174/22/17

In this six day class you'll study and build this greene and greene inspired side table that fits well with either traditional or contemporary designs. It includes the iconic proud finger joints and square ebony plugs as well as wedged through tenons common in other arts and crafts styles. We'll also study wood selection and milling, mortise and tenons, drawer construction and fitting, cloud lifts, and much more. The hardware for this project, including the drawer runners and stops, will…

Find out more »
April 2018
$1535.00

Blacker House Inspired Chair with William Ng

4/7/184/14/18

This is perhaps the most difficult class we offer at our school. This class is not for the faint hearted. This chair will challenge every area of your woodworking skill. We will be dealing with angles, proportion, chair design, choosing wood grain, sculpting of the crest rail using an angle grinder, inlay techniques for the back slat, scribing techniques, angled mortise & tenons, and compound angles. We'll also be covering details such as leg indents, angled ebony splines, brackets, and…

Find out more »
$860.00

Inlay Techniques in the G & G Style

4/16/184/20/18

In this class we will be covering basic inlay techniques from design, materials, cutting, fitting, gluing up, to finishing. We'll proceed with more advanced techniques used in some of the Greene & Greene furniture. We will be dealing with materials such as shells, silver, brass, wood, plastic, and any material that we can cut, which is almost endless. The main tool for the class will be a four inch jeweler fret saw. Proper cutting technique will be emphasized. There will…

Find out more »
$360

Finishing Techniques With Brian Miller

4/21/184/22/18

This class will give every student a thorough understanding of the finishing process. It will cover all aspects of wood finishing: Proper sanding techniques, coloring wood (dyes, stains, chemical and plant dyes), color-matching, membrane finishes (shellac, varnish, lacquer) and understanding solvents and their use in the finishing process. We will also explore hand-rubbed finishes, shading and toning, making your own custom stains and finishes and stripping/refinishing furniture and cabinetry. A discussion of modern spray equipment and their uses will also…

Find out more »
$1230.00

Making Custom Cabinets with Taeho Kwon

4/23/184/28/18

In this class, we will cover different methods and techniques for cabinet construction. These methods can be applied to building kitchens, vanities, entertainment unit, build-in, home theaters or just a stand alone cabinet. We will build a cabinet using face frame, finish ends with frame and panel. We will cover topics such as door making from raised panels to grain matching, drawer construction using dovetail joinery, box joint or lock joints, hardware options and installation. If you are planning to…

Find out more »
$2500.00

Guitar Making with Eric Nichols

4/30/185/12/18

In this class, the goal is to construct a Dreadnought style acoustic steel string guitar. The students will receive instruction so they can follow all the steps needed to make the instrument including joining and bracing the top and back plates, installing the rosette, bending the sides, constructing and binding the body, fabricate and carve the neck, make the bridge, install the tuners, installing the frets and setting up up the nut and saddle for proper play ability. The materials…

Find out more »
April 2019
$300.00 - $875.00

Sculpted Table With David A. Wade

4/4/194/7/19

$875.00 (Includes all Materials)         . $300.00 Deposit (Balance due 30 days before class) We have an exceptional opportunity offering a class taught by David A Wade, who had worked along side Sam Maloof for over 25 years. David sculpted many of Sam’s creations from the iconic sculpted rocking chair to the sculpted table. Many refer to sculpted Maloof pieces as “sensuous” and are drawn to touch his works. Every woodworker desiring to enhance their craft will benefit…

Find out more »
$300.00 - $1250.00

G & G Inspired Coffee Table

4/15/194/20/19

$1250.00 (Includes all Materials)            . $300.00 Deposit (Balance due 30 days before class) In this class not only will we build this beautiful coffee table inspired by Greene and Greene, Stickley and a little bit of Krenov, but we will learn many table construction techniques. Reading wood grain, Mortise & tenon, shaping wood, bread board ends, drawer construction, fitting the drawer, as well as many of the Greene and Greene details such as square ebony…

Find out more »
August 2019
$100.00 - $400.00

Inlay Techniques with William Ng

8/10/198/11/19

$400.00 (Includes all Materials)               . $100.00 Deposit ( Balance due 30 days before class) Using inlay to embellish your projects can be very rewarding. It's a way to take your work to the next level, to set yourself apart from others. In this intensive two day class we will cover the following topics. 1. Tools, including the jeweler's fretsaw, carving tools, shop made vises, and a vise that I personally designed and use. 2.…

Find out more »
$300.00 - $1250.00

Making Custom Cabinets

8/12/198/17/19

$1250.00 (Includes all Materials)                            . $300.00 Deposit (Balance due 30 days before class) In this class, we will cover different methods and techniques for cabinet construction. These methods can be applied to building kitchens, vanities, entertainment unit, build-in, home theaters or just a stand alone cabinet. We will build a cabinet using face frame, finish ends with frame and panel. We will cover topics such as door…

Find out more »
+ Export Events